auna 10006450, Руководство пользователя

Страница: 10 / 10

Remote control
1. POWER
2. Number Button
3. Clock
4. Band/APS
5. INT
6. REPEAT
7.
8. Mode change
9. Random
10. Last Song
11. Select
12. Next Song
13. Last 10 song
14. Next 10 song
15. Volume-
REMARK:
When on radio state, 1-6 number button can choose the relative station.
While on music playing mode, number buttons will have different functions like 1:PAU, 2:INT, 3:RPT, 4:RDM,
5, DIR+, 6: DIR-.
Trouble shooting
Fault Reason Solutions
LCD doesn't
display
1. Yellow wire is not connected with
.
2. Fuse of red wire is open.
3. The panel connector is dirty.
1. Assure yellow wire is connected
with .
2. Replace fuse.
3. Clean the panel connector with
absolute alcohol.
No sound 1. No power supply.
2. Speaker wire is open circuit
3. SD/MMC card, U disk don't have song
with corresponding format.
4. SD/MMC card, U disk golden finger is
dirt which causes bad contact.
1. Connect the power wire.
2. Connect speaker wire.
3. Check the contents of SD/MMC
card, U disk.
4. Clean with absolute alcohol.
Low sound
(not clear) 1. Power internal resistance is high.
2. Antenna is bad contact.
1. Replace the power supply
2. Tighten the antenna plug.
Mono track 1. One channel of speaker wire is open
circuit.
2. Amplifier integrated circuit is damaged.
1. Connect speaker wire
2. Replace the IC of amplifier.
System down Power supplier not stable Long press the reset button
NOTE: Technical data is subject to change without prior notice.