Set to tuner mode.
1. Turn to the desired radio station by “ manual” or “ auto ” tuning method.
2. Press the Mem/Clk-adj ” button (18) until the “ MEM ” indicator and preset station number flash
on LCD display (1).
3. Press “ Folder / Pre-up
button (6) to select the desired station memory for storage.
4. Press “ Mem/Clk-adj ” button (18) again to confirm the setting.
5. Repeat step 1 to 4 to store other stations.
6. Now you can select the presets stations in order by pressing the “Folder/Pre–up ” button (6)
The pre-set memories will be cancelled completely if dis-connecting the main power supply. You
are recommended to switch the system into standby mode for convenience usage.
There are 5 seconds for program state, after 5 sec. This state would resume to normal tuner mode
automatically.
You can overwrite a present station by storing another frequency in its place.
FM-stereo reception
•
Press the “ St/Mono ” button (2) repeatedly, the FM programs are receiving in mono and stereo
mode repeatedly. In particular when stereo signals are weak. It is preferable to receive the
program in mono.
•
If stereo signal is being received, the stereo indicator “
” will appear on LCD display (1) to
show FM stereo program is now receiving.
Hints for best reception:
FM : the receiver has a build-in FM wire antenna (22) hanging at the rear cabinet. This wire should
be totally unraveled and extended for the best reception.
PLAYING COMPACT DISC
Getting start
1. Press Function button (4) to select “ CD ” mode,
2. Press “ CD tray Open/Close ” button (16) to open the CD tray.
3. Place a CD with the printed side facing up inside the tray & then close the CD tray by pressing the
“ CD tray Open/Close ” button (16) again.
4. Focus search is performing, the LCD display (1) will show the total number of tracks & total playing
time. Then, the unit will start to automatically.
5. Adjust Volume up/down button (5) to the desired volume level.
Play / pause mode
To interrupt, press the “ Play/Pause
button (14) once, and the playing time will be freeze on the LCD
display (1). Press again to resume normal playback.
Stop mode
▪
If “ Stop
▪
” button (2) is pressed during play or pause mode, system will go to stop mode.
Skip mode (skip up
/ skip down
)
1.
During play or pause mode, if “ Skip up
” button (3) is pressed. It will go to next track and
display the track no. and then remain the play or pause mode.
2.
During play or pause mode, if “ Skip down
” button (3) is pressed. It will go to the previous
track, original track no. is display and remain the play or pause mode.
13
