Aumuller OFV1 M-COM, Инструкции по сборке и пусконаладке

Страница: 19 / 32

19
Assembly Instruction
OFV1
Cable routing on or in the casement
Cable on casement Cable in glazing bead
Connection cable routing on the casement:
• Cable must be protected against damage (shearing-off, kinking,
splitting), i.e. by using bushings.
Upon removal of the glazing bead is the dan-
ger that the glass may fall.
Cable crossover without
protective cable hose
Cable crossover with
protective cable hose
Connection cable routing on the hinge side:
• Make sure that during opening or closing procedure the cable will
not be damaged by shearing-off, kinking, crushing.
• Protect cable feedthrough in profile e.g. by using cable bushings,
cable transitions.
RA RA FL
BD Kabel-Schutzschlauch
BD AK
FL
Drill hole in glazing bead
(cable bushing protects against
damage to cable).
I
nstallatIon step
10: c
abLe rOuting
Cable routing on the frame
„
Route cable on the frame or mullion/transom.
Cable must be protected against damage (shearing-off,
kinking, splitting).
cable duct glued on
(in addition secured with counter-
sunk screws against breaking away)
AK
RA
FL
Cable duct glued on
(in addition secured with
countersunk screws against
breaking away).
oFV1 oFV1
AK
AK
RA RA
FL
C
able routing
Note cable routing!
(see chapter „
c
abLe rOuting
“)
Check function! (see chapter
„
s
aFety check and
p
erFOrming
t
est
r
un
“).
07
I
nstallatIon step
9: m
Ount the hOusing On the
OFV1
„
Using the screws

and mount the housing

on the
locking drive OFV1 .
1
2
oFV1