AUMA SARV 07.2 страница 23 Скачать руководство пользователя

Страница: 23 / 96

5.4.

Accessories for assembly

5.4.1.

Stem protection tube for rising valve stem

Figure 20: Assembly of the stem protection tube

[1]

Protective cap for stem protection tube (fitted)

[1]*

Option: Protective cap made of steel (screwed)

[2]

Stem protection tube

[3]

V-seal

Procedure

Seal all threads with hemp, Teflon tape, sealing agent or thread sealing mater-
ial.

Screw stem protection tube [2] into thread and tighten it firmly.

Information: For stem protection tubes made of two or more segments, all
parts have to be thoroughly screwed together.

Figure 21: Protection tube made of segments with threaded sleeves (>900 mm)

[2]

Segment of stem protection tube

[3]

V-seal

[4]

Threaded sleeve

Push down the sealing ring [3] onto the housing.

Information: For mounting segments, push down seals of segments down to
the sleeve (connecting piece).

Check whether protective cap [1] for stem protection tube is available, in perfect
condition and tightly placed on or screwed to the tube.

Risk of bending or oscillation of protection tubes exceeding a length of 2 m!

Risk of damage at stem and/or protection tube.

→

Secure protection tubes exceeding 2 m by an appropriate support.

SAV 07.2 – SAV 16.2 / SARV 07.2 – SARV 16.2 Control unit: electronic (MWG)
ACV 01.2 HART

Assembly

Содержание SARV 07.2

































































































Результаты поиска

Содержание SARV 07.2

Отзывы:

Похожие инструкции для SARV 07.2

Бренды по названию

Популярные бренды

AUMA SARV 07.2, Руководство по эксплуатации

Результаты поиска

Содержание SARV 07.2

Отзывы:

Похожие инструкции для SARV 07.2

Бренды по названию

Популярные бренды