AUMA PROFOX PF-M100X Скачать руководство пользователя

Страница: 45 / 56

14.

Technical data

Information

The following tables include standard and optional features. For detailed information
on the customer-specific version, refer to the order-related data sheet. The technical
data sheet can be downloaded from the Internet in both German and English at ht-
tp://www.auma.com (please state the order number).

14.1.

Technical data Multi-turn actuators with integral controls for open-close and modulating duty

Features and functions

Ex db h IIC T4 Gb
Ex h tb IIIC T130°C Db

Explosion protection

DEKRA 21ATEX0092 X
IECEx DEK 21.0058X

Product certificates

Classes A and B according to ISO 22153, short-time duty S2 - 15 min

Open-close
duty:

Type of duty

Class C according to ISO 22153, intermittent duty S4 - 50 % with maximum number of
200 starts/h

Modulating
duty:

For nominal voltage and +40 °C ambient temperature and at load of 35 % of the maximum torque. The
type of duty must not be exceeded.

Variable speed, brushless motor
Soft start / soft stop. The progress characteristics can be configured as requested.

Motor

F (motor winding)

Insulation class

Via short-circuit protection and current measurement

Motor protection

At standstill with spring-applied brake

Self-locking

1 – 27 turns/stroke

Standard:

Turns / stroke

27 – 400 turns/stroke
Solutions for a mechanical position indication are available up to maximum 54 turns/stroke.

Option:

Via hall sensors

Limit switching

Via electronic current measurement. Tripping torques infinitely adjustable via Bluetooth. 8 levels can be
selected when placing the order.

Torque switching

Continuous indication.
Versions:
1 – 9 turns/stroke
9 – 14 turns/stroke
14 – 27 turns/stroke

Standard:

Mechanical position indicator

Without mechanical position indicator

Option:

Manual drive for setting and emergency operation, handwheel does not rotate during
electrical operation.

Standard:

Manual operation

Without manual operation, this means handwheel and handwheel shaft are obsolete.

Option:

Coupling unbored

Standard:

Coupling

●

Coupling unbored extended

●

Finish machining of coupling (standard or extended)

Bore according to EN ISO 5211 with 1 keyway according to DIN 6885-1

Square bore according to EN ISO 5211

Two-flat according to EN ISO 5211

Options:

Dimensions according to EN ISO 5211

Standard:

Valve attachment

●

With output drive type A

●

With LE linear thrust unit

●

With GS worm gearbox

Options:

PF-M25X – PF-M100X
Parallel

Technical data

Содержание PROFOX PF-M100X

























































Результаты поиска

Содержание PROFOX PF-M100X

Отзывы:

Похожие инструкции для PROFOX PF-M100X

Бренды по названию

Популярные бренды

AUMA PROFOX PF-M100X, Руководство пользователя

Результаты поиска

Содержание PROFOX PF-M100X

Отзывы:

Похожие инструкции для PROFOX PF-M100X

Бренды по названию

Популярные бренды