English
-8-
-7-
5.3 Volume and Track Control
5.3.1 Volume Control
To adjust the volume either slide and hold the multifunction switch to
the left or right or adjust the volume on your source device.
For computers
1) Enable the Bluetooth function on your computer.
2) Select “Devices and Printers” from the Control Panel and click “Add a
Device”.
3) Select “MS625” from the available devices, the system will install the
driver automatically.
4) Once successfully paired and connected, the status LED will light
constant blue.
For a TV or Set-Top Box with Integrated Bluetooth Connection
1) Scan for available Bluetooth devices on your TV or Set-Top Box (see
your TV or Set-Top Box user manual for instructions if needed).
2) Select “MS625” from available devices.
3) Once successfully paired and connected, the status LED will light
constant blue.
For TV with No Bluetooth Connection
To connect to a TV or Set-Top box without a Bluetooth connection, you
will require a Bluetooth Transmitter such as the August MR250.
1) Plug the transmitter into the headphone socket of your TV.
2) Switch the transmitter on and enter pairing mode (for more
information, please refer to the transmitter user manual). Please ensure
that no other Bluetooth device is available for pairing nearby.
3) The transmitter will automatically pair with the MS625. Once
successfully paired and connected, the status LED will light constant
blue.
Note:
the compatibility of third party transmitters with the MS625
cannot be guaranteed.
5.3.2 Track Control
To control the track slide the multifunction switch to the left or right to
skip or repeat track. Press the multifunction switch to play or pause
playback.
Note:
Volume and track control require A2DP on your source device,
please refer to its user manual to see if it has A2DP.
5.4 Audio In Mode
To use the MS625 with a non-Bluetooth source device, connect the
source device to the main speaker audio in socket using the provided
3.5mm audio cable. Once connected the LED on the main speaker will
light red.
6. Charging
To charge the MS625, connect the micro USB lead to the device power
sockets, and the other end of the power cable to a powered USB port.
The LED lights red whilst charging and turns off once the battery is
fully charged.
