-4-
-5-
E
n
g
li
sh
3) Select “EP620” from the available devices, the
system will install the driver automatically.
For Windows 98, XP and Vista, a third-party
Bluetooth driver is needed (not included).
4) The status LED double flashes once per second
whilst paired.
5) If the EP620 is not automatically set as your
output device, select ”Sound” from the control
panel then highlight the EP620 and select “Set
Default”.
Note:
When switched on, the EP620 will
automatically reconnect to the last paired
Bluetooth device if it is in range.
5.3 Voice Control
Press the Enter button to activate your mobile
phone’s voice control.
5.4 Hands-free Calling
Whilst connected to your mobile phone, the
EP620 will act as a hands-free system for calls.
5.4.1 Answering / Ending a call
Press the Enter button to answer the incoming call
or end the current call.
5.4.2 Rejecting an incoming call
Press and hold the Enter button for 3 seconds to
reject the incoming call.
5.4.3 Handset Transfer
During a call, press and hold the Volume up
Note:
button for 3 seconds to transfer the In-Call audio
source between the phone and the headset.
5.4.4 Call waiting
If you receive a call whilst a call is in progress,
press the Enter button to end the current call and
answer the incoming call. Press and hold the
Enter button to answer the incoming call and
place the current call on hold.
5.4.5 Mute
During a call, press and hold the Volume down
button for 2 seconds to mute or un-mute the
headset. There is a reminder tone every 10
seconds while the headset is muted.
5.4.6 Re-dialing the last number
Double press the Enter button to redial the last
called number on your phone.
6. Charging
When the battery is low, the EP620 beeps every
20 seconds and the status LED flashes red to
indicate low power. To recharge the battery, use
the supplied micro USB cable to connect the
EP620 to a powered USB port.
The status LED constantly lights red whilst
charging and turns blue once the battery is fully
charged.
Note:
1) Only use certified USB chargers from branded
manufacturers.
2) Fully charge the headset before first use.
3) If unused for a long period of time, fully charge
the battery before use.
