Telephoning
COMtrexx Business - FW 1.4 - Instructions V02 06/2021
35
29. Open the page
Exchange Lines
>
Exchange line request and locations
. Configure
the location or locations of the PBX, the exchange lines and the end devices.
30. Open the pages of the folder
Exchange lines
. Enter the settings according to the
existing provider.
31. Open the page
User
>
Phone numbers
. Configure the phone numbers for the users.
32. Open the page
Administration
>
Network
>
Server services
. Activate the function
Auto provisioning active
.
Note:
Make sure that there is only this PBX in the network when activating auto
provisioning.
33. Switch on the telephones. After successful auto provisioning, the telephones are
displayed under
Telephones
>
Assignment
.
34. If required, open the pages of the folders
Internal Devices
and
External Devices
.
Configure the internal and external devices.
35. Assign the end devices to the users.
Telephoning
Outgoing Calls/Exchange Line Request
When dialling phone numbers, the exchange line request type configured for the user must
be noted. The PBX distinguishes two types of exchange line requests:
Automatic exchange line request (factory setting):
Neither for the internal nor for the
external number a prefix is required. The PBX automatically distinguishes between internal
and external numbers with the adjustment of the dialled phone number and the internal
numbering plan:
•
If the phone number is contained in the telephone numbering list, the PBX establishes
an internal connection.
•
If the phone number is not contained in the telephone numbering list the PBX establishes
an external connection.
Note:
To avoid conflicts between 3 or 4 digit phone numbers of the local area network
and the internal numbering plan, phone numbers of the local area network should
always be dialled with local area code.
Note:
Also when the entered phone number correspond with the internal telephone
numbering plan, the PBX waits up to 4 seconds for whether additional digits for an
external number are being entered, before it dials the internal phone number. To avoid
waiting time, you can subsequently enter #. The PBX therefore recognises the input
as finished and instantly starts dialling.
Internal telephone:
The user has to dial an external number with preceding exchange line
access number.
Содержание COMtrexx Business
Страница 2: ......
