Auerswald COMfortel Voicemail, Инструкция по эксплуатации

Страница: 16 / 44

Commissioning
16
6.
Use the keypad to enter the internal telephone number previously config-
ured in the PBX.
If you have entered a user PIN for the system telephone in the PBX
configuration, the menu for entering the registration PIN appears on the
display.
7.
Use the keypad to enter the user PIN of the telephone entered in the PBX
configuration.
8.
Press the softkey to finish the entry.
The system telephone searches for the PBX.
Note: If no PBX is found, you will be prompted to enter the IP address of
the PBX via the keypad.
If a PBX is found, its IP address is shown on the display.
9.
Press the softkey to confirm the IP address displayed.
Note: If there are two or more PBXs on the network and the display is
showing the IP address of the incorrect PBX, press the
softkey. Enter
the IP address for the correct PBX.
The system telephone registers itself on the PBX. If the registration is
successful, the date and time as well as the name and MSN of the sub-
scriber are displayed. The telephone is now ready for use.
Note: If the PBX does not detect the date and time yet, only the name and
version of the telephone are displayed.
Further Steps
쑱
Configure the telephone according to your individual needs. You can carry
out the configuration either via the menu on the display (see the configura-
tion and operating manual on the accompanying CD) or via the integrated
configuration manager (recommended; see
page 20 ).
쑱
If necessary, carry out a firmware update in order to extend the telephone
with the newly available functions (see
page 20 ). Information about new
features is available on the support pages at the Auerswald web site (Inter-
net address: www.auerswald.de).