Auerswald COMfortel M-520 Скачать руководство пользователя страница 48

Страница: 48 / 55

Attaching the belt clip

COMfortel M-520 - Advanced Information V01 08/2019

Appendix

Attaching the belt clip

The handset has notches on each side for attaching the belt clip.

•

Attaching the belt clip:

Press the belt clip onto the back of the

handset so that the tabs on the belt clip click into place in the
notches.

•

Removing the belt clip:

Press the centre of the belt clip firmly

with your right thumb.

Push the nail of your left thumb up

between the clip and the casing.

Slide the clip upwards to

remove.

Connecting the headset

Connect the headset with 2.5 mm jack to the left side of the
handset .

The headset volume corresponds with the setting for the receiver
volume (

p. 39).

Connecting the USB data cable

For data exchange between the handset and PC:

Connect the USB data cable with micro-USB plug into the
USB socket at the bottom of the handset

Contact with liquid

If the device comes into contact with liquid:

Disconnect the power supply.

Remove the batteries and leave the battery compartment open.

Allow the liquid to drain from the device.

Pat all parts dry.

Place the device in a dry, warm place

for at least 72 hours

(

not

in a microwave, oven etc.) with the battery

compartment open and the keypad facing down (if applicable).

Do not switch on the device again until it is completely dry.

When it has fully dried out, you will normally be able to use it again.

Connect the handset

directly

to the PC,

not

via a

USB hub.

Содержание COMfortel M-520
























































Результаты поиска

Содержание COMfortel M-520

Отзывы:

Похожие инструкции для COMfortel M-520

Бренды по названию

Популярные бренды

Auerswald COMfortel M-520, Расширенная информация

Результаты поиска

Содержание COMfortel M-520

Отзывы:

Похожие инструкции для COMfortel M-520

Бренды по названию

Популярные бренды