auer ADW3M, Руководство пользователя

Страница: 2 / 12

NOTICE
Carefully read the instructions contained in this manual, as
they provide important information which is essential for safe
and proper installation, use and maintenance of the appliance.
This appliance complies with the following EEC
directives:
- 73/23/EEC of 19 February 1973 (Low Voltage) and subse-
quent modifications;
- 89/336/EEC of 3 May 1989 (Electromagnetic Compatibility)
and subsequent modifications.
- Carefully dispose of the packing material.
- After removing the packing, check that the appliance is not
damaged. If in doubt, contact a qualified professional.
- The dishwasher must only be used by adults for the washing
of household dishes and cooking utensils.
- Fundamental rules to follow when using the appliance:
* Never touch the dishwasher when barefoot or with wet hands
or feet;
* We discourage the use of extension cords and multiple sockets;
* During installation, the power supply cord must not be
excessively or dangerously bent or flattened;
Safety Is a Good Habit to Develop
Close-up View (control panel)
A
B
C
ON-OFF Light
D
E
Program Symbols
Handle For Opening Door
Cycle Select Knob
* If the appliance is not operating properly or maintenance must
be performed, disconnect the appliance from the power supply.
- Keep detergents out of the reach of children, who must also be
kept away from the dishwasher when it is open.
- This appliance cannot be installed outdoors, not even if the
area in which it is installed is covered by a roof; it is also very
dangerous to leave it exposed to the rain and elements.
- Do not touch the heating element during or after a wash cycle.
- Do not lean or sit on the door when it is open, as this could
overturn the dishwasher.
- If the appliance malfunctions, turn off the water supply to the
appliance and disconnect the plug from the wall socket. Then,
consult the section entitled, "Troubleshooting". If you cannot
solve the problem, contact a service centre.
- Only specialised personnel are authorised to make repairs.
- Appliances which are no longer being used must be made
inoperable by cutting the power supply cord and removing the
door lock.
- The appliance must be positioned so that the plug is accessible.
- The carpet must not obstruct the opening when the appliance is
installed on a carpeted floor.
- If the supply cord is damaged, it must be replaced by the
manufacture, its service agent of similarly qualified persons in
order to avoid a hazard.
.1.
GB
ON-OFF Button
A
E
B C
D