Auer Signal wFT3, Руководство по эксплуатации

Страница: 9 / 28

9
Mounting and installing
Protect the telephone from direct rays of the sun and sources of heat.
Wall version
Fasten the telephone mount with 4 screws (2). Place the provided washers Ø 18 mm under
the screw head.
Place the telephone in the upper latches (A) , swing it downwards until the lower latches
audibly engage
(B)
.
Remove the keypad plate (6) , and tighten the two locking screws (3) as far as they will go.
Important: This preserves the IP65 degree of protection.
Pull the telephone line through the cable gland
(4)
and connect it with terminal
(5)
TCP/La -
TCP/Lb (TCP : Terminal Connection Point).
Use cables with a sheath diameter of 5 to 9 mm only, otherwise the IP65 degree of
protection can not be guaranteed.
Bore
illustration
(not to scale)