CALL: 503-682-6933 FAX: 503-682-7114 www.audixusa.com
Audix Corporation 9400 SW Barber St, Wilsonville, OR 97070. In Canada, Cabletek Electronics LTD, 604-942-1001 fax 604-942-1010
®Audix Corporation 2010. All rights reserved. Audix and the Audix logo are trademarks of Audix Corporation
AUDIX WARRANTY REGISTRATION FORM
Please Check all that apply:
Male Female
Age:
Occupation:
Primary Instruments: Product to be used for:
18 or Under
Musician
Vocal
Pro live sound
19-25
Producer
Guitar
Pro recording
26-35
Sound Eng.
Drums
Home recording
36-45
Radio/TV
Keyboard
Rehearsal
46-55
Production
Brass
Installation
55 +
Other _______
Woodwinds
School
Strings
House of Worship
How did you hear about Audix?
Other ___________ Other ___________
Magazine Ad Online Ad
On-line Store Friend Do you own other Audix Products? Yes No
Salesman Other __________ Model(s) ________________________________
Have you visited the Audix website? Yes No
Please register your product online at www.audixusa.com or mail this form to:
Audix Microphones ATTN: WARRANTY P.O. Box 4010 Wilsonville, OR 97070
Name:________________________________ Model:___________________
Company:_____________________________ Serial Number:_____________
Address:______________________________ Store:____________________
City:_________________________________ Store Location:_____________
Prov./State:___________ Zip:_____________ Purchase Date:_____________
Phone: ( )___________________________ Signature:_________________
Email:________________________________ Date:____________________
Input connectors 3-pin XLRF-type connector
On-Off Switch Noise free mechanical
push-on/push-off
Input connector 3-pin XLRF-type
Output connector 3-pin XLRM-type
Off (mute) attenuation > 45 dB minimum
Phantom power 11-52V DC, 2 mA
Requirements (for condensers) 12 – 52 volts DC
Finish Black matte
Weight 1.4 kg / 3 pounds
Length 160 mm / 6.9 inches
Width
124 mm / 5.9 inches
Height
45 mm / 1.8 inches
SPECIFICATIONS:
ARCHITECTS AND ENGINEERS SPECIFICATIONS:
The table stand shall be constructed from die a cast metal base to provide maximum stability on
a desk, podium, or table. The table stand shall be designed to work with any dynamic gooseneck
or phantom powered condenser gooseneck microphone operating between 12-52 volts phantom
and having a standard 3-pin XLRm connector. The table stand shall incorporate a noise free
mechanical push on / push off which will provide over 45 dB of attenuation when in the “off”
position. The table stand shall incorporate an LED light to indicate when the system is in the “on”
mode. The table stand shall have a 3 pin XLR-f connector for audio input and a 3 pin XLR-m
connector for output. The stand shall be finished in non-reflective matte black finish and have
dimensions of 160 mm (6.3 inches) length, 124 mm (5.9 inches ) width, and 45 mm (1.8 inches)
maximum height. The table stand shall be the ATS-10.
DIMENSIONS (mm):
SERVICE AND WARRANTY:
The ATS-10 is under warranty for a period of 1 year from any
and all manufacturing defects. Should your microphone fail
in any way, please contact the Audix Service department
at 503-682-6933. A Return Authorization number is
required before returning any products
.
***All specifications subject to change without notice.
