audium Air Wireless, Руководство пользователя

Страница: 17 / 27

- 17 -
Active Input Monitor :
„Active Input“ means, that there is signal on the input. Some devices produce signal (also
silence is a signal when transferring data through SPDIF) even in Standby. So, you have to turn
the device off completely through the main switch, or assign it a lower priority (see below)
You can check whether a device is detected as ON with the „Input Monitor“ in the Setup menu.
O indicates an active Input, - indicates an inactive input.
In our example setup this would mean:
Only device which is on is the Flat-TV
CD-Player is off
No AirPlay playback
Changing the Input Priority
If you wish a different input priority scheme you can change this in the setup menu.
Enter the setup menu, then the select Air Setup, then Input Prio:
The Display shows the current Priority 1-3 setting.
Turning the encoder will cycle through all possible priority combinations. Turn it until you found
the one you deserve, then push the encoder and the new order will be saved.
NOTE! If a device causes an active input at the Master, it may not go to standby as long as you
leave this device on / in standby. Turn it off through the main switch, and the Airs will go to
standby also.