manualshive.com logo in svg

Audison TH uno Thesis, Руководство для продвинутых пользователей

Поделиться
Скачать
Audison TH uno Thesis Скачать руководство пользователя страница 53

53

Digital domain

ADVANCED MANUAL / TH uno

ENTER

TO EXIT

UP

DOWN

UP

DOWN

DOWN

UP

UP

DOWN

MENU

ENTER

ASC - Amplifier Status Controller

Status Monitor

This feature of the ASC provides the ability to monitor the amplifier working status by moving through the 
different entries the data regarding the working TH amplifier will show. When displaying a value, if you do not 
act on any of the buttons for 5 seconds, the ASC automatically goes back to the default display screen.

Displays the voltage measured on the amplifier power supply terminals.

Displays the working temperature measured on the heat sink internal surface 

Displays the amplifier Mode (the selected Dual Power preset )

Displays the amplifier function inside the system, identified by its own ID.

Displays the amplifier PRE output function inside the system, identified by its 

specific ID. 

These functions are only customisable if the PC is connected through the 

ACNet software. 

These entries are displayed on the Status Monitor only if customized.

Displays the input sensitivity range and value measured in volts, both being 

adjusted by the relative potentiometer on the INPUT PANEL or by the ACNet 

software. 

Displays the PRE output sensitivity range and value measured in volts, both 

being adjusted exclusively by the ACNet sofware.

Displays the main input type selected on the amplifier.

Displays the filter slope pre-set during the amplifier Setup.

Indicates whether the amplifier is set to work in stereo or mono configuration.

Displays the value of the amplifier digital address selected in the ADRS 

specific selector located on the FRONT PANEL.

Displays the amplifier serial number. 

The user can not modify this field in any way.

Displays the version of the installed ASC software.

Содержание TH uno Thesis








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды