Audison AV uno, Руководство пользователя

Страница: 22 / 32

OWNER’S MANUAL AV uno
/
22
AV bit IN
AD Link
IN OUT
AC Link
IN OUT
1 2
MENU DOWN UP ENTER
AV bit IN
ON
OFF
U2
JMP1
ACLINK TURN ON
9.2 FRONT PANEL
1. AD Link: Digital audio bus that can transmit the signal of 8 channels. It exploits a Class 5 or 6 shielded cable for
Ethernet networks normally used in computer networks.
AD Link IN: RJ-45 input terminal to connect a digital signal coming from other AV amplifiers or
other external devices equipped with AD Link (bit One / bit Ten D).
AD Link OUT: RJ-45 terminal output for connection to external devices capable of receiving the AD Link
digital signal (AV / TH amplifiers).
2. AC Link: It is composed of a digital bus and control signals for the management of the functions of the device to
which it is connected. It provides the ability to build a digital network interacting with other devices provided
with AC Link such as AV / TH amplifiers and digital audio processors. The RJ-12 terminated cable is a
6-pin cable, like the one normally used for digital telephone purposes, but it is not compatible with digital
telephone technology.
AC Link IN:
RJ-12 input terminal for connection to the processor or other devices located upstream of the system
(see 9.4)
.
AC Link OUT: RJ-12 input terminal for connection to the processor or other devices located downstream of the
system
(see 9.4)
.
The AC Link connection is able to provide power to the external device.
AC Link-Remote IN: If an amplifier provided with AV bit IN is connected to bit Ten D processor, the amplifier can be
turned on via the processor, without the use of the amplifier Remote-In.
If another processor is used (bit One) or if there is a Thesis TH amplifier in the AC Link chain, the Remote-In
function on the AC Link won’t be available.
If in the AC Link chain there is an amplifier different from the AVs (Thesis TH), the Remote-In function on the
AC Link has to be disabled. Set the AV bit IN AC Link Turn ON jumper to OFF as shown in the image below.
WARNING:
for AC Link / AD Link connections, only use the cables supplied with the products.
Important:
adjust the amplifier volumes to position 1 (5V RMS) when using the AV bit IN module.
9