Audipack 261511, Руководство пользователя, Страница: 3 / 4

Installation of the 261436 remote set
While adjusting / programming, push buttons within 4.5 seconds. Longer will resukt in a reset to previous state.
Controlled switching
Step 1: Connect the DC1149C receiver to the Audipack product according the wire diagram
Step 2: Press 1 x on the programm button of the reciver, a red / orange LED will blink shortly
Step 3: Press 1 x on the P2 button of the remote, a blue LED will blink shortly
Step 4: Press 1 x again on the P2 button of the remote, a blue LED will blink shortly
Step 5: Press 1 x on the UP botton of the remote. Leds will blink to confirm the connection.
Automatic switching (pulse)
Step 1: Press 1 x on the P2 button of the remote, a blue LED will blink shortly
Step 2: Press 1 x on the UP botton of the remote. Leds will blink to confirm the connection
Step 3: Press 1 x on the P2 button of the remote, a blue LED will blink shortly
Adding a transmitter remote
Step 1: Press 1 x on the P2 button of the remote, a blue LED will blink shortly
Step 2: Press 1 x on the P2 button of the remote, a blue LED will blink shortly
Step 3: Press 1 x on the P2 button of the remote, a blue LED will blink shortly
The extra remote is now added.
Resetting the receiver, all remotes will be erased.
Step 1: Press 1 x on the P2 button of the remote, a blue LED will blink shortly
Step 2: Press 1 x on the
“STOP” (middel) button, a blue LED will blink shortly
Step 3: Press 1 x on the P2 button of the remote, a blue LED will blink shortly
All remotes are erased
Installation of the insert PCB 261511
Cut ff power of the product
Insert the PCB in the main PCB
Line out the connectors well
Fasten the PCB with the white clamps
261125
261195
261427