CAR REARVIEW CAMERA
GENERAL:
After installation, the rear view system will automatically activate when reverse
gear is selected. This can provide a clear image for the driver and protect children,
pedestrians etc from injury. Also your vehicle will avoid costly repairs from dents
and other damage when parking.
CAMERA:
The DUAL HEAD system included with your purchase allows for flexible installation
options, either surface mount (eg number plate or boot lid) or stealth insert mount
(eg bumper).
The RCA video cable simply connects with most aftermarket LCD monitors.
CAUTION:
Protective film (if attached) should be removed from camera before operation.
Carefully check the +/- wiring sequence during installation.
Ensure safety when installing wires near the fuel tank
INSTALLATION:
1) Determine installation location (usually the centre-rear of vehicle).
a) Butterfly Type - Mount on surface using double-sided tape or screws
b) Insert Type - Carefully drill hole (hole saw supplied) in bumper & insert camera
2) Connect RED cable to 12V+ power cable of Reversing Light circuit.
3) Connect BLACK cable to ground.
4) Connect signal extension cable.
5) Connect RCA (YELLOW) video cable to LCD monitor.
Содержание Axis 2 Series
Страница 4: ......
