Setting Volume Level
Press the Volume - button to lower the system volume. Press the
button to make the system volume louder.
Adjusting the Subwoofer Volume
The subwoofer volume level is best set up by turning the volume
control on the subwoofer to about 3/4 full, then adjust with the
console’s rear mounted subwoofer volume knob to the amount of
bass you desire. Bass output may vary due to room environment
and location of the 4TV.
Setting the Trim Switch (Optional)
Use the rear mounted trim switch to adjust the level of input from
your TV or other audio device. Some TVs or devices may have a
weak output signal or the signal strength may be too strong and
can create noise. There are 3 positions on the switch to allow you
to adjust to the optimal setting.
Mute
To mute the system volume, press the “Mute” button on the control
panel.
Program your Remote Control (Program )
Step 1. Press the Remote Learning button on the 4TV control
panel. The Remote Learning light will turn on and flash.
Step 2. Press the button on the 4TV control panel to be
learned. The Remote Learning and buttons will light.
Step 3. While pointing your TV or Cable/Sat remote control to
the 4TV, press the button on the remote control 4 times
to be learned. The Remote Learning light and the light
on the 4TV will blink 4 times and then turn off to confirm.
Note:
If Remote Learning is not confirmed, lights will blink alternating several times.
8
Trim
1 2 3
Sub VOL
Sub VOL
Trim
1 2 3
Trim
1 2 3
Sub VOL
Trim
1 2 3
Sub VOL
