1) Make the connections to the vehicle for the 12 pin wiring harness.
2) When connecting an AV Component, insert the Circular Mini-Din Connector of the source component
harness through the wire tie loop on the main PCB and into the Mini-Din Connector on the main PCB.
Pull the wire tie loop tight and cut off the excess.
3) Connect power harness to vehicle electrical system by tapping into an accessory hot line and also a
ground.
4) Connect 8 pin wiring harness from video monitor to the mating connector on FM Modulator.
5) Connect the FM Modulator to the Vehicle Radio.
6) Mount and connect the Television Antenna (sold separately).
7) Verify all functions of the System before final mounting of the finished assembly.
A/V Source Definitions:
1= TV Tuner
2= AV1 input (VCP, game or future DVD, etc)
3= AUX input (VCP, game or future DVD, etc)
4= Built -in DVD
-6-
VOD806
1
T V a n ten na
(If a p p lic ab le )
12 Pin Po wer signal
Harness
A cc e ss o ry
H a rn e s s
8 P in M odu lato r
Hardness
LEFT
WHITE
RIGHT
RED
TO
FACTORY
RADIO
TO
OPTIONAL
ADDITIONAL
MONITOR
RCA-Female
Patch Cord
RCA Male to Male
12 VDC Power and Ground
Auxillary
video display
INPUT
VIDEO
LINE
OUT
VIDEO
To Secondary AV Monitor
Choke
Power Harness
Red: +12VDC
(Accessory Cir.)
Black: Ground
Optional Remote Headphone Stations
Stereo
Headphone Jack
Stereo
Headphone Jack
Green
(Right+)
Black
(Ground)
Gray
(Left+)
,+ 8
CH-3
CH-4
#8 )
Mini-Din Connectors
Red RCA (Audio Right)
White RCA (Audio Left)
Yellow RCA (Video)
Out
Power Connector
4 Pin
Y Adapter
for
use with
Installations
IR LED:
Clean the IR
Receiver Window
on the front of the
VCP. Remove
Adhesive Backing
and Apply IR LE
to IR Window on
the Face of the VCP.
FM
Modulator
Am/Fm
Antenna
Dash Radio
FM Modulator
Hard Wired FM Modulator Output
For Receivers with Low Level Audio Input
Dom e Light Co nnection.
Refe r to C onnecting the
Dom e Lights
Sold Separately
