10
OPERATION
SWITCHING ON/OFF THE UNIT
Switch on the unit by pressing any button
(except
RELEASE button (7) and
button (4)). When system is on, press
POWER button (9) to turn off the unit.
FACEPLATE RELEASE
Press
RELEASE button (7) to detach
the removable faceplate.
SOUND ADJUSTMENT
Press
SEL
button (10) to select the desired
adjustment mode. The adjustment mode
will change in the following order:
By pressing the
VOL+/-
button (11)/(12), it
is possible to adjust the desired sound
quality.
LOUDNESS
Press
LOUD
button (2) to reinforce the
bass output. Press it again to release this
function.
SET THE CLOCK
Press the
DISP
button (15), the clock is
shown on the LCD display. Then hold
down the button until the clock flashes.
Then press the
+
button (17) to change
hours or
button (16) to change
minutes.
MUTE
Press
MUTE
button (3) to mute down the
sound instantly. If any button is pressed in
the mute state, the mute state is released.
EQUALIZATION
Press
EQ
button (19) to turn on
equalization function and to select desired
audio mode. There are five kinds of mode
as below:
→
FLAT
→
CLASSICS
→
POP M
→
ROCK M
→
DSP OFF
DISPLAY (8)
Exhibit current frequency and activated
functions on the display (8).
REMOTE SENSOR (OPTIONAL)
Point the remote control handset to the
remote sensor IR (26). Press the function
keys on the handset to control the system.
RESET FUNCTION
RESET
button (28) must be activated with
either a ballpoint pen or thin metal object.
The
RESET
button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press
RESET
button (28), the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
AUXILIARY INPUT FUNCTION
The unit can be connected to a portable
audio player through the
AUX in
jack (27)
on the front panel.
RADIO OPERATION
y
SWITCHING TO RADIO MODE
Press
MODE
button (6) shortly to select
radio mode, the radio mode appears in
the display together with the memory
band and frequency.
y
SELECTING THE FREQUENCY BAND
At radio mode, press
BND
button (13)
to select the desired band.
The reception band will change in the
following order:
y
SELECTING STATION
Press
button (17) or
button
(16) shortly to activate automatic seek
function. Press for several seconds until
“
MANUAL
” appears on the display, the
manual tuning mode is selected. If both
buttons have not been pressed for
several seconds, they will return to seek
tuning mode and “
AUTO
” appears on
(
(
