Connecting the VR-1 from the
Audio Outputs of Your TV
1. Use a set of red and white audio connection cables
to connect the audio output of your TV to the INPUT
of the VR-1.
2. Use another set of red and white connection cables
(not included) to connect the OUTPUT of the VR-1 to
the input of your stereo or home theater receiver.
3. Connect the A/C adapter to the DC input of the VR-1.
4. Plug the A/C adapter into a working electrical outlet.
Note: You may need to enable the audio output feature of
your TV. Please check the owner’s manual of your system to
determine how to do this.
VR-1
4
VR-1
TV Volume Regulator
VR-1
Owner’s Manual
Limited Warranty
Audiovox Corporation (Audiovox) warrants this product against defects in
materials or workmanship for one (1) year from the date of purchase. During
this period, this product will be replaced without charge. This warranty does
not cover any damage due to acts of nature, commercial use, accident,
misuse, abuse or negligence. This warranty is only valid in the USA.
Replacement as provided under this warranty is the exclusive remedy of the
consumer. Audiovox shall not be liable for any incidental or consequential
damages for breach of any express or implied warranty on this product, except
to the extent that limitations of this sort are prohibited by applicable law.
THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURCHASE EXCEPT TO THE EXTENT THAT IMPLIED
WARRANTIES OR EITHER SORT ARE REQUIRED BY APPLICABLE LAW, AND IN
SUCH CASE, EACH WARRANTY IS LIMITED IN DURATION TO THE ONE YEAR.
AUDIO
OUT
RIGHT
LEFT
Stereo/Receiver
AUDIO
IN
LEFT
SPEAKER
RIGHT
SPEAKER
RIGHT
LEFT
IN
OUT
L R
L R
TERK and the TERK logo are registered trademarks of AUDIOVOX Corp.
102P005A
For customer service and
technical information::1.800.290.6650
For Customer Service
Visit Our Website At
www.audiovox.com
Product Information, Photos,
FAQ’s, Owner’s Manuals