Installation
(continued)
Connecting your TV5
There are two ways to connect your TV5. This will depend
on your model of television.
For Televisions with One 75 Ohm Input for VHF and UHF:
1. Connect the coaxial cable from your TV5 to the
“F” connector input marked VHF/UHF on your TV.
See Fig 2.
For Televisions with Separate 75 Ohm
VHF and UHF Inputs:
1. Attach the band separator (included) to the coaxial
cable attached to the back of your TV5.
2. Screw in the VHF connector from the band separator to
the VHF input on your TV or VCR.
3. Attach the 300 ohm twin wire from the band separator
to the two screws marked UHF.
See Fig 3.
Powering your TV5
Attach the AC adapter (included) to the DC input on the
rear of your TV5. Plug the other end of the adaptor into
any 12 volt AC outlet.
TV5
3
