Audiovox Pursuit PRO-9642 Скачать руководство пользователя страница 2

ARMING THE SYSTEM - ACTIVE
1. Turn off the engine, exit the vehicle and close all doors, hood lid, and trunk lid.
2. Press and release the Arm / Lock button on the keychain transmitter.

þ

 Red dash mounted LED begins to flash slowly.

þ

 Parking Lights flash one time.

þ

 Siren and / or Horn sounds one chirp.

If the siren sounds 3 chirps, then you have left a door, trunk, or  the hood
lid ajar. Simply close the opened entry point to provide full protection. If the
siren/horn did not sound when arming, then the chirps have been turned
off and you should refer to the section titled "ELIMINATING THE ARM /
DISARM CHIRPS" in this manual.

o

 Doors Lock - Optional

SILENT ARMING - ACTIVE
1. Turn off the engine, exit the vehicle and close all doors, hood lid and trunk lid.
2. Press and hold the Arm / Lock button on the keychain transmitter for 2 seconds.

þ

 Red dash mounted LED begins to flash slowly.

þ

 Parking Lights flash one time.

þ

 Siren/Horn will not sound.

If the siren/horn sounds 3 chirps, then you have left a door, trunk, or the
hood lid ajar. Simply close the opened entry point to provide full protection.

o

 Doors Lock - Optional

ARMING THE SYSTEM - PASSIVE ( AUTOMATIC )
1. Turn off the engine, exit the vehicle and close and lock all doors, hood lid, and trunk lid.

þ

 Red dash mounted LED begins to flash rapidly, indicating 30 second passive

arming has begun.

2. Opening any protected entry point during the 30 second passive arming cycle will

immediately suspend automatic arming and the 30 second passive arming cycle will
re-start when all doors are closed. At the end of the passive arming cycle;

þ

 Red dash mounted LED begins to flash slowly.

þ

 Parking Lights flash one time.

þ

 Siren and or Horn sounds one chirp

If the siren/horn did not sound when arming, then the chirps have been
turned off and you should refer to the section titled "ELIMINATING THE
ARM / DISARM CHIRPS" in this manual.

o

 Doors Lock - Optional

Door locking during passive arming is a selectable feature. The alarm can
be programmed to allow the doors to lock only when arming using the
keychain transmitter and they will not automatically lock during passive arming.

PROTECTION WHILE THE SYSTEM IS ARMED

þ

 Opening any protected door, hood, or trunk lid will cause the alarm to immediately sound.

The alarm will continue to sound for 30 seconds, then stop and continue to monitor all

Page 2

Содержание Pursuit PRO-9642









Отзывы: