-3-
NOTE: If the optional 2-step unlock feature was installed, then only the
driver's door will unlock during step 2 above. To disarm the system
and unlock all doors, press the transmitter button two times within
three seconds. The system will disarm, and all the doors will unlock.
3. Never attempt to disarm the system from a distance that prevents you
from opening a door within 30 seconds. When the system is programed for
passive arming, it will begin to re-arm until a door is opened. Opening the
door will suspend the passive arming cycle.
INTRUSION WARNING SIGNAL:
(OPTIONAL PARK LIGHT RELAY REQUIRED)
The system will inform you if an intrusion attempt has occurred while you
were away from the vehicle. If an intrusion attempt has occurred, the
vehicle’s parking lights will flash 3 times to indicate an intrusion has
occurred.
This intrusion warning indicator is stored in the system’s memory, and will
only be erased from memory when the ignition key is turned on.
VALET / SYSTEM OVERRIDE SWITCH:
The “Valet” switch allows you to temporarily bypass all security functions,
eliminating the need to hand your transmitter to parking attendants or garage
mechanics. When the system is in the valet mode, all security functions are
bypassed, however, the remote door locks will remain operational. To use
the valet mode;
1. Enter the vehicle and turn the ignition key to the “on” position.
2. Move the valet toggle switch to the “on” position.
3. To return to normal operation, move the valet switch to the “off” position
any time the ignition is on.
In the event you lose your transmitter, or if the transmitter fails to disarm the
system, the valet switch can be used as a system override switch. Open the
car door (the lights will flash). Turn the ignition key to on, and move the valet
switch to the “on” position. The lights will stop flashing, and the vehicle can
now be started.
NOTE: Always remember to move the Valet Switch back to the “off” position.
This will ensure that the vehicle remains protected at all times.
REMOTE PANIC OPERATION (CHANNEL 1):
The Lock/Unlock button on your keychain transmitter also functions as a
“panic” switch for instant activation of the lights in emergency situations. To
use the remote panic switch;
