TRANSMITTER PROGRAMMING GUIDE
Model : PRO-OE3B3
The transmitters included with the security system have been pre-programmed
at the factory, with each button pre-assigned to control a specific function of the
security system. Although the security system in the vehicle has either a 3 or 4
channel receiver, depending on the model, the transmitters included with the
system are capable of transmitting 7 distinct signals. This allows you to program
each transmitter to more than one vehicle in two car families and also allows you
to change which button(s) control certain functions of the system.
(Example: Transmitter channel 5 can be programmed to activate Receiver
channel 2.) Refer to the chart below for access to each of the transmitter channels,
and for the standard factory button assignments.
Some of the more common accessories for these additional channels are;
AS 9554
Remote Garage Door Interface
AS 9075
Remote car starter
AS 9153
Remote window roll up
AS 9256
Remote trunk release relay
TRANSMITTER
SYSTEM RECEIVER
CHANNEL
BUTTON
CHANNEL
FUNCTION
Remote Arm
1
1
Remote Emergency Panic
Remote Door Lock
Remote Disarm
2
2
Remote Emergency Panic
Remote Door Unlock/Unlock 2
3
3
4
&
4
5
&
5
6
&
6
RF Channel For Options
7
7
RF Channel For Options
All 3
Buttons
Single Push Pulsed Output for Optional Accessory
Or Double Push For Additional Optional Accessory
Single Push Pulsed Output for Optional Accessory
Or Push And Hold For Extended Output
Single Push Pulsed Output for Optional Accessory
Or Push And Hold For Extended Output
