Congratulations on your purchase of the
Prestige High Performance
Subwoofer. The
Prestige Subwoofers are designed to provide you with high
quality Bass reproduction required to make your car audio system perform to
its full potential.
PRESTIGE Subwoofer Features
l
Dual 4-Ohm voice coil for maximum flexibility and performance
l
Low-Q parameters for Isobaric and small sealed box enclosures
l
Vented magnet for improved performance
l
Gold-plated binding posts that can accept up to 10-gauge wire
l
Long throw suspension assembly
l
Poly-carbon woofer cone
l
Chrome basket
SUBWOOFER PARAMETERS
PSW-10DC
PSW-12DC
Nominal Power Rating
225 Watts
260 Watts
Maximum Power Rating
450 Watts
525 Watts
Ferrite Magnet
30 Ounce
40 Ounce
Frequency Response
20 Hz-2.5 kHz
20 Hz-2.5 kHz
Resonant Frequency (F/O)
32 Hz ± 20%
20 Hz ± 20%
VC Diameter
1.5"
2.0"
Sound Pressure Level
89 dB ± 1.5 dB
90 dB ± 1.5 dB
Xmax
6mm
7mm
Nominal Impedance
4 Ohms x 2
4 Ohms x 2
DCR
3.7 Ohms
3.4 Ohms
Speaker Weight
3.0 kg
4.3 kg
WARNING:
High-powered car audio systems may produce sound
pressure levels that exceed the threshold at which hearing
loss may result. They may also impair a driver’s ability to
hear traffic sounds or emergency vehicles. Use common
sense and practice safe listening habits when listening to
your audio system.
DUAL VOICE COIL WIRING
CAUTION:
Never connect only one voice coil of a dual voice coil woofer.
Both must be driven at the same time for proper operation.
Never connect an amplifier to an impedance load lower than
it is rated to handle.
SERIES/PARALLEL MONAURAL CONNECTION
Parallel wiring for a single, dual-voice coil 4-Ohm woofer in a monaural system will
result in a total impedance load of 2 Ohms at the amplifier, (See Fig. 1) if your
amplifier is rated to drive 2 Ohms in bridged or one-channel operation. If each of
2
