Page 2
YOUR “ ANTI - CODE GRABBING “ TRANSMITTERS
The transmitters included with your new remote start system use the most
advanced and secure form of radio frequency transmission available on any
current automotive remote system. Some of today’s sophisticated auto thieves use
a device known as a code grabber, which will receive and store the signal from
your keychain transmitter, and re-transmit at a later time to disarm your system.
Your anti-code grabbing transmitters will change their signal every time the
button is pressed, so when a thief grabs then re-transmits your signal, the
remote system
will not
respond.
If your transmitter button is pressed more than fifty times while it is out of range
of the vehicle ( children playing with your keys ), the transmitter will not operate
when you return to the vehicle, and will need to be re-aligned to the receiver. To
do this, simply press button 1 two times within a one second time period. The
system will now respond to that transmitter each time a button is pressed.
For reference the transmitter packaged with your APS-675 is shown with
numbers referring to the text below.
KEYLESS ENTRY
1. To lock or unlock the doors simply press and release button 1 on
the keychain transmitter. As a keyless entry unit, for your convenience,
the parking lights will flash once when the doors are locked and twice
when the door are unlocked.
If the optional Illuminated feature has been added, when unlocking
the doors the interior light will turn on and remain on for 30 seconds
or untill the key is turned on.
ADDITIONAL REMOTE FUNCTION (CHANNEL 2)
This system has an additional feature that can be connected to a number of
different optional accessories. Some of the more common uses for this
channel are;
Remote Trunk Release
Remote Window Closure
Remote Garage Door Interface
To activate the optional accessory, press and hold button 2 on the keychain
transmitter for 4 seconds.
NOTE:
The feature that has been added to channel 2 will always be activated using
the same transmitter button that remotely starts the vehicle. There is no way
to move the channel 2 function to a different transmitter button.
ADDITIONAL REMOTE FUNCTION (CHANNEL 3)
This system has an additional feature that can be connected to a number of
different optional accessories. Some of the more common uses for this
channel are;
Remote Trunk Release
Remote Window Closure
Remote Garage Door Interface
