-7-
which can be interfaced to an external audio source. The
connectors are compatible with most CD and cassette players or
an MP3 digital audio playback unit. When the external source is
connected and the AUX button is pressed, only that media is
played by the radio; no other input sources (radio, cassette or
CD) are operative.
bt
TAPE PLAYER SELECTOR (TAPE)
This button is used to select the audio cassette player playback
mode. When a cassette is loaded in the unit (
T-IN
displayed) and the button is pressed, the TAPE indication also
appears on the display and the tape begins play from the point
at which it was stopped. A second press of the button will initiate
the tape pause mode, and PAUS will appear on the display. To
exit audio cassette play mode, press the BAND button (radio
play) or the CD play/ pause (
) button (CD play).
During integral CD player operation, this button may be used to
change to tape play without ejecting the disc. The
indication will remain on the display panel to show that the disc
is still loaded in the unit.
bu
CASSETTE DOOR
Open and fold down the front panel of the unit. Hold the cassette
with the exposed tape edge of the side to be played to the right
and insert it fully into the cassette door (TAPE will appear on the
display panel accompanied by the
T-IN
symbol, and play
direction arrow (
or
), as the cassette is engaged and
begins playing). When the cassette reaches the end on the side
of the tape being played, the unit will automatically change
direction of play as shown by the arrow indications on the display
panel.
NOTE: Observe cassette operation cautions in the Care and
Maintenance section of this manual.
cl
FAST-FORWARD/REWIND BUTTONS (
/
)
These buttons cause the tape to move rapidly in the direction
indicated by the arrows. For example, if the
button is pushed
when the tape is moving from left to right (
on the display
panel), the tape will fast-forward. If the button is pressed while
the tape is moving from right to left (
on the display panel), the
tape will rewind. To stop fast tape movement, lightly push the
opposite button. If the tape is allowed to fast-forward or rewind all
the way to the end, play will automatically begin again from that
point.
cm
TAPE PROGRAM SELECTOR
To manually reverse tape direction and play the other side (program)
of the cassette, lightly push both the Fast-Forward and Rewind
buttons at the same time. The change of direction will be shown
by the arrows on the display panel.
cn
AUTOMATIC MUSIC SEARCH (AMS)
During tape play, automatic music search allows you to skip to
the beginning of another song or piece of music. To initiate music
search, press the PGM/AMS button to begin search; AMS will
appear at the top of the display. Then press the fast forward
(
) or rewind (
) buttons to skip to another piece of music or