FM modulator
FM radio
+12V Constant (GREEN w/WHITE STRIPE)
Connect this wire to a terminal which is always
energized.
+12V Accessory / Switched (ORANGE w/WHITE STRIPE)
Connect this wire to a terminal which is energized when the
ignition switch is turned to the "ON" or "ACCESSORY"
position.
Fuses
Wired
Commander
CD changer
From antenna
VEHICLE WIRING
MOUNTING THE WIRED COMMANDER
1. Determine where the commander unit will be located.
2. Be sure that the mounting surface where the commander unit will
be located is clean and dry.
3. Remove the protective paper from the back of the Velcro strip.
4. Apply the commander unit to the desired location.
After completing all connections, press the RESET button on the
commander unit.
MOUNTING THE FM MODULATOR
Install the FM Modulator to the mounting surface with the included
self-tapping screws (M3 x 12).
M3 x 12
Screws
FM Modulator
Wired Commander
Ground (BLACK)
Attach this wire to the chassis of the car. Be
sure that the surface is free of paint, and is not
rusty. If a proper ground connection is not
made, the CD changer may not operate
correctly and stray noise may be picked
up by the unit.
DIN cable
(supplied with CD changer)
Commander connection cord
© 1997 AUDIOVOX CORP., HAUPPAUGE, N.Y
Form No. 128-5137
To FM radio antenna
input