NOTE: Bass and Treble cannot be adjusted while the
Equalizer function
cs
is in ROCK, CLAS or POP mode.
4
BASS CONTROL
To adjust the bass level (equalizer function inactive), first select the
Bass mode by pressing the SEL button
3
so the BAS indication
appears on the display panel. Within 3 seconds of choosing the
Bass mode, rotate the AUDIO CONTROL knob
2
in the DN
direction to decrease the bass response, or in the UP direction to
increase it as desired. The level will be shown on the display panel
from a minimum of BAS -12 to a maximum of BAS +12 (BAS 00
indicates flat response). The display will automatically return to
the normal indication 3 seconds after the last adjustment or when
another function is activated.
NOTE: Bass and Treble cannot be adjusted while the
Equalizer function
cs
is in ROCK, CLAS or POP mode.
5
TREBLE CONTROL
To adjust the treble level (equalizer function inactive), first select
the Treble mode by pressing the SEL button
3
so the TRE indication
appears on the display panel. Within 3 seconds of choosing the
Treble mode, rotate the AUDIO CONTROL knob
2
in the DN
direction to decrease the treble response or the UP direction to
increase it as desired. The level will be shown on the display panel
from a minimum TRE -12 to a maximum of TRE +12 (TRE 00
indicates flat response). The display will automatically return to
the normal indication 3 seconds after the last adjustment or when
another function is activated.
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the SEL button
3
so the BAL indication appears
on the display panel. Within 3 seconds of choosing the Balance
mode, rotate the AUDIO CONTROL knob
2
in the DN direction to
-4-
adjust the stereo balance to the left channel speakers or the UP
direction to adjust it to the right channel speakers. The balance
position will be shown on the display panel from BAL L16 (full left)
to BAL R16 (full right). When the volume level between the left and
right speakers is equal, BAL 00 will be shown on the display
panel. The display will automatically return to the normal indication
3 seconds after the last adjustment or when another function is
activated.
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode
by pressing the SEL button
3
so the FAD indication appears on
the display panel. Within 3 seconds of choosing the Fader mode,
rotate the AUDIO CONTROL button
2
in the DN direction to adjust
the front-rear speaker balance to the rear speakers or the UP
direction to adjust it to the front speakers. The fader position will
be shown on the display panel from FAD R16 (full rear) to FAD F16
(full front). When the level between the front and rear speakers is
equal, FAD 00 will be shown on the display panel. The display will
automatically return to the normal indication 3 seconds after the
last adjustment or when another function is activated.
8
LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this feature will boost
the bass and treble ranges to compensate for the characteristics
of human hearing. Press the button momentarily to activate this
feature; the LOUD indication will appear on the display panel.
Pressing the button again momentarily will deactivate the feature
(the
LOUD indication will disappear from the display panel).
9
AM/FM CHANNEL SELECTOR (BAND)
Each time this button is pressed, the radio band is changed. The
indication AM1, AM2, FM1, FM2 or FM3 will appear on the display
panel according to your selection.
