background image

-11-

ds

  CUE/REVIEW FUNCTIONS ( 

 / 

 )

High-speed audible search to any section of the disc can be made
by  the Cue and Review  functions.  Repeatedly  press   the Cue

 )  side of the button to advance rapidly in the forward direction

(disc  play  symbol rotation on the display panel  will stop),  or  the
Review ( 

 ) side of the button to advance rapidly in the backward

direction.

dt

  TRACK/DISC SCAN SELECTOR (SCN)

When the SCN  button is pressed, the SCAN  indication will appear
on the display panel, and the first 10 seconds of each track on the
disc will be played in order.  When a desired track is reached,
press the SCN  button twice, and play of the selected track
willcontinue (SCAN) will disappear from the display panel).  The
Track Scan mode will also be canceled  by activating the Repeat
or Random Play functions.
When the SCN  button is pressed twice the DISC and SCN
indications  will appear on the display panel and the first 10 seconds
of the first track on each disc in the magazine will be played.  When
a desired disc is reached, press the SCN button again and play of
the selected disc will continue (DISC and SCN will disappear from
the display panel).  The Disc Scan mode will also be canceled by
activating the Repeat Play or Random Play functions.

du

  DISC/TRACK REPEAT PLAY (RPT)

When the RPT  button is pressed, the RPT  indication will appear on
the display panel and play of the selected track will be continually
repeated 

until the Track Repeat mode is canceled by pressing the

RPT button twice, or by activating the Scan or Random Play
functions.
When the Repeat button is pressed twice the DISC and RPT
indications will appear on the display panel and play of the selected

Built into this radio are controls to operate an optional CD changer.
Please check with your Prestige/Audiovox car stereo specialist or
call 1-800-645-4994 for recommendations of the models that will
work with this radio.
Adjustment of the audio functions (volume, tone, balance, and
fader) for the CD changer operate in the same manner as they do
for radio play.  The following controls will operate the CD changer
when it is installed and connected to this radio.  Refer to the
owner’s manual included with the CD changer for instructions on
the installation and correct loading and use of the CD magazine.

dp

 CD CHANGER MODE SELECTOR (MODE)

During radio or CD play, press this button to select operation of the
CD changer  as shown by CDC on the display panel.  Disc play will
begin and the disc and track number will be shown on the display
panel.  When the magazine is  loaded into the changer, play will
begin from the first  track of the first disc in the magazine.

dq

  DISC SELECT (D.UP/D.DN)

These buttons are used to select the desired disc for play.  To
advance to a higher number disc, press the D.UP button.  To return
to a lower  number disc, press the D.DN button.   The number of
the disc in play will be shown on the display panel.

dr

  TRACK SELECT (

 / 

 )

The Track Select functions are used to quickly access the beginning
of a particular track.  Each time the Forward Track Select (

)

button is pressed, the next higher track number will be selected as
shown on the display panel.  Similarly, each time the Backward
Track Select (

 )  button is pressed, the next lower track number

will be selected as shown on the display panel.

CD CHANGER CONTROLS

Содержание Prestige P-950

















Отзывы: