Audiovox MVX-480 Series, Руководство пользователя, Страница: 18 / 50

END-TO-END SIGNALING
This feature permits you to utilize additional phone services, such as accessing an alternate long distance network,
signaling a pager, or banking by phone etc.. For these services the signaling should be in DTMF (TouchTone™).
SCRATCH PAD DIALING
This feature permits you to enter a number to be redialed (or store a number in memory) while engaged in a conversa-
tion.
SCRATCH-PAD DIALING WITHOUT KEYING TONES
This feature permits you to enter a number into the display without annoying key tones.
1. Press , , then enter a phone number.
“TONE OFF” will be displayed for 5 seconds.
The Microphone circuit will remain active, but the tones will not be heard.
2. If necessary, press , , then enter the memory address to store the number.
3. To exit the Scratch-pad Mode, press , then key again.
“TONE ON” will be displayed for 5 seconds.
CALL TIME DISPLAY
This feature automatically records the elapsed time per conversation. The talk time of the last call and cumulative talk
time can be displayed on the readout. The timers can also be cleared if necessary.
To Display the Talk Time
1. Press , then key .
2. While the key is held down, the cumulative talk time will be displayed on the readout in minute format.
Example … 18 min.
3. The talk time of the last call will be displayed on the readout for 5 seconds after the is released. While in
conversation, the talk time of a call in progress will be displayed. The display formate is as follows. Example …
1min. and 25 sec.
Outgoing Call Timer Only (Programmable Option)
Normal call timer operation is to time both the calls made and the calls received. If the “outgoing call timer only”
function is activated (Programmable Option), the call timer will only display the amount of time when placing call. It will
not display the amount of time for calls received.