background image

Features

TFT Active Matrix Color LCD
4 Channel A/V Switching Built In (RCA Jacks Interrupt Source #3)
Audio Amplifier, Volume Control, and Headphone Jacks Built In
VCP, Game, DVD, A/V Input Jacks
Back lit Controls for Easy Night Time Operation
“Hide-Away” Screen When Not in Use
Built In TV Tuner
Infrared Remote Control Repeater Circuit (For wireless Video
Cassette and Tuner Functions)

Specifications

Video System:             NTSC Analog Composite Video (1V P-P, 75

)

A/V Switch:                  4 Source Channel
Power:                        10-16 VDC, Negative Ground
AVX Audio Outputs:    L&R Variable (800mV max, 8

 load min.)

                                    L&R Fixed (300mV typical, 600

 load min.)

Current Consumption (Stand by Mode):           40mA
Current Consumption (On, No VCP):                1.4mA
VCP Stand-by Mode:                                        140mA
VCP On Mode:                                                  800mA
Current Consumption (VCP On):                       2.2A
Audio Noise Floor @ 30kHz BW:                       48dB
THD+N @ 1kHz:                                               A/V in 5%, TV in 3%
Cross Talk @ 1kHZ & 30kHz BW:                    35dB
Maximum Input Level, Audio L&R:                    500mV
Frequency Response, 20 Hz- 20kHz:               -11dB ~ -2dB
Frequency Response, 40Hz- 16kHz:                -4dB ~ 1.5dB
Channel Balance:                                              0dB
Volume Control:                                                 0.3mV ~ 2.75V
Unit Weight:                                                       1.5Kg

1

Содержание LCM640TV









Отзывы: