System Setup and Operation
Preparations
1. Connect the unit to the required power, antenna and video sources then press the POWER button
to turn on the unit.
2. Press the
Input
button to display the Input menu, then press the
or
button to select TV. Follow
by pressing the
Enter
button to activate the TV mode.
Selecting a Function for Set Up
Press the
Menu
button to activate the main
setup menu, as shown on the right:
Use the
▲
or
▼
button to select
Setup
then
press
◄
or
►
button to enter the setup
menu. Use
▲
or
▼
button to highlight the
function which will be setup. Press the
◄
or
►
button to return to the previous menu.
Press the
Exit
button to exit the setup
menu.
Tuning Band
Press the
▲
or
▼
button to select the
Tuning Band
then press the
Enter
button to cycle through the
available option: Air, Cable, Cable HRC, Cable IRC, Cable Auto.
DTV Signal
Press the
▲
or
▼
button to select
DTV Signal
then press the
Enter
button, the screen will display
the DTV Signal status, press the
Enter
button again to return to the previous menu.
Auto Ch Search
Press the
▲
or
▼
button to select the
Auto
Ch Search
then press the
Enter
button to
begin the auto searching/programming, see
the figure to the right :
After auto-searching/programming, the unit
will exit and automatically memorizing the
channels found. Upon exiting it will go to the
first found channel.
During searching, press the
Exit
button to
terminate the search process and exit
Setup.
- 23 -
