-7-
-8-
-9-
This product contains a low
power laser device.
811-330391-081
ITEMS TO CHECK
• Make sure AC power plug is secure in the outlet, and
outlet has power.
• Make sure FUNCTION button is set to CD.
• Make sure disc label is facing up.
• Make sure disc is clean.
• Pause mode is activated.
• Disc may be damaged or dirty; check disc.
• Make sure the unit is on a secure spot. Vibration or jarring
can cause the disc to skip.
• Make sure FM antenna wire is unwound.
• Electrical interference in your home can cause poor
reception. Move the unit away from sources of
interference (especially those with motors and
transformers).
• Set the AM loop antenna to a direction for the better
reception.
PROBLEMS
CD
System does not turn on
Disc in place but unit won't play
Disc skips
RADIO
Poor FM reception
Poor AM reception
Power consumption:
40 W
Power source:
AC ~
120V 60 Hz (USA and Canada)
AC ~ 220V 50 Hz (China)
AC ~ 230V 50 Hz (Europe and Hong Kong)
AC ~ 240V 50 Hz (Australia)
AC ~ 110-120V/220-240V 50/60Hz (Others)
Specifications subject to changed without notice.
TROUBLE SHOOTING GUIDE
SPECIFICATIONS
Printed in China
-10-
VERTICAL CD MICRO SYSTEM
WITH RADIO
OPERATING INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE
SHOCK HAZARD DO NOT OPEN
WARNING
RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR
AVIS
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
PRODUTO LASER CLASSE 1
PRODUKT DER LASERKLASSE 1
KLASSE 1 LASER PRODUCT
APARELHO LASER DE CLASSE 1
USING THE REMOTE CONTROL CORRECTLY
•
Point the Remote Control at the REMOTE SENSOR located on the unit.
•
When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR
may be degraded, causing unreliable operation.
•
The recommended effective distance for remote operation is about 4 meters (13 feet).
TO CHANGE REMOTE BATTERY
1. Open the battery door.
2. Insert one CR2025 (3V) size battery.
BATTERY REPLACEMENT
When battery become weak, the operating distance of the Remote Control is greatly reduced
and you will need to replace the battery.
NOTE:
If the Remote Control is not to be used for a long time, remove the battery to avoid damage
caused by battery leakage corrosion.
ATTENTION
Take out the PVC sheet before operating the
Remote Control.
CLEANING CD
If the CD skips or will not play, the disc may need cleaning.
Before playing, wipe the disc from the center out with a cleaning
cloth. After playing, store the disc in its case.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth.
IMPORTANT NOTICE:
•
Should the CD door be opened before the reading of the CD is completed, a jamming noise may occur.
This can be resolved by closing the CD door and then press TUNER button temporarily to RADIO.
•
If an abnormal display indication or an operating problem occurs, disconnect the AC power cord. Wait at
least 5 seconds, then reconnect the AC power cord.
•
Before transporting the unit, remove the disc from the CD tray.
MAINTENANCE
TO REPEAT THE WHOLE DISC
Press
REPEAT/PRESET button a second time to repeat all tracks, the repeat all indicator
will be shown on the display.
TO CANCEL REPEAT PLAY
Press
PRESET/REPEAT button until REPEAT indicator disappears.
Press INTRO button.
INTRO appears on the display.
INTRODUCTION PLAY
This function allows the first 10 seconds of each
track of the disc to be played.
To cancel introduction play.
Press
STOP or INTRO button so that
INTRO on the display goes out.
Press RANDOM button.
RANDOM appears on the display and the
disc will play automatically.
RANDOM PLAY
All the tracks on the disc can be played in
random order.
To cancel random play.
Press STOP or RANDOM button so that
RANDOM on the display goes out.
REMOTE CONTROL
1.
DISPLAY button
2.
STANDBY / ON button
3.
FUNCTION (TUNER/CD/AUX) button
4.
PRESET/REPEAT button
5.
STOP/BAND button
6.
TUNING /
SKIP/SEARCH buttons
7.
MEMORY
button
8.
RANDOM button
9.
SLEEP button
10. SNOOZE button
11.
PLAY/PAUSE button
12.
TUNING/
SKIP/SEARCH buttons
13. X-BASS button
14. INTRO button
15. TIMER button
16. \- controls
PRESET
INTRO
RANDOM
3
10
9
15
11
12
13
14
16
1
2
4
5
6
7
8
INTRO
CD
CD
RANDOM
CD
REPEAT
1. Press MEMORY button.
2. Press
TUNING
/
SKIP
buttons to select your desired track.
PROGRAMMING TRACKS - in the CD stop mode
3. Press MEMORY button again.
4. Repeat steps 2 and 3 to program
additional tracks. After you finish program
procedure, the memory indicator will blink
on the display. Press
PLAY/PAUSE
button to start playback and memory
indicator will appear on the display.
To check the program
In stop mode, press MEMORY button. The
disc, track and program numbers will appear on
the display.
Press
MEMORY button again to view the
other programmed selections.
These displays do not appear on the display
during playback.
To play the programmed tracks
Press
PLAY/PAUSE button.
To stop programmed play
Press STOP button. If you want to recover
the playback of programmed tracks, you can
first press MEMORY button and then press
PLAY button again.
To clear the memory content
Press STOP button and then open the CD
door or press MEMORY button and then
press STOP button in stop mode.
REPEAT PLAY
This function will allow a single track or all tracks on the disc to be played repeatedly.
TO REPEAT THE SAME TRACK
Press
REPEAT/PRESET button once during playback, the repeat one indicator will blink.
MEMORY
TUNING
TUNING
PLAY/
PAUSE
PRESET
CD
REPEAT
MEMORY
CD
MEMORY
MEMORY
CD
MEMORY
CD
TUNING INTO A PRESET STATION
Press
REPEAT/PRESET button to select a preset number.
NOTE: If no button is pressed again within 10 seconds, the preset mode will be exited
automatically.
2. Press
OPEN/CLOSE button to open
CD door. Place a disc in the CD tray with
the label face front and then press
OPEN/CLOSE button to close it. The
total number of tracks will be shown on
the display.
NOTE:
• Do not push the CD door to close it.
• CD door cannot open when power is off.
TO INTERRUPT PLAYBACK
Press
PLAY/PAUSE button.
The track time will blink.
To resume playback, press
PLAY/PAUSE
button again.
TO STOP PLAYBACK
Press STOP button.
CD PLAYBACK
1. Press FUNCTION button to CD.
3. To start playing, press
PLAY/
PAUSE button.
To move backward at high speed
Keep SKIP
button pressed during
playback and release at the desired point.
To move forward at high speed
Keep SKIP
button pressed during
playback and release at the desired point.
Locating a particular point in a track
To find a previous track
Press SKIP
button once to return to
the beginning of the current track.
Press SKIP
button repeatedly to skip
tracks backward one by one.
To skip tracks
Press SKIP
button repeatedly to skip
track(s) forward one by one.
Searching for the beginning of a track
Keep it pressed
Press it once
NOTE: The CD player may skip if high volume or x-bass levels are used.
PRESET
FUNCTION
CD DOOR
OPEN/CLOSE
PLAY/
PAUSE
BAND
TUNING
TUNING
TUNING
TUNING
MEMORY
TUNER
FM
MHz
