background image

Battery Power Operation
1. Open the battery compartment cover

and insert two "AA" alkaline batter-
ies inside the battery compartment.
Follow the polarity as indicated in the
battery compartment.

2. Close the battery compartment

cover.

2

3

LOCATION OF CONTROLS

AC Operation
1. Insert the DC plug, at the end of the

AC adapter cord into the DC input
jack on the unit.

2. Plug the AC adapter into a 120V/

50Hz AC power outlet socket.

Note: If the AC plug of this unit does
not fit in your AC outlet, a plug adaptor
(Not supplied) should be used.
Consult your local dealer on the type of
plug adapter required.

LOW BATTERY ALERT
When the battery indicator (Batt.)
appears in the LCD panel, the batteries
are becoming discharged. The CD
player will not function properly and the
batteries must be replaced. If Ni-cd
rechargeable batteries are being used
follow the instructions on how to
recharge the batteries detailed in this
manual.

POWER SOURCES NORMAL BATTERIES / AC ADAPTER

Average Playing Time
   (Continuous Play)

Battery Type

Normal Play     Anti-Skip
     Mode

    Play Mode

Alkaline "AA"

Ni-CAD
Rechargeable
(min specification
recommended
1.2V - 650mA)

NOTE: Zinc/Carbon or Zinc/Chloride type
batteries are not recommended for this unit as
their use will result in extremely short playing
times. To economize on batteries, it is
recommended that the AC adapter supplied
with this unit be used whenever possible.

1. Charge Indicator
2. Skip Up Button
3. Skip Down Button
4. DC Input Socket
5. Battery Door
6. Hold Switch
7. LCD Display
8. Play/Pause Button

9. Stop Button
10. Anti-Shock Button
11. Program Button
12. Mode Button
13. Door Open Button
14. Bass Boost Switch
15. Phones Jack
16. Volume Control

ON

Approx. 9 hrs.     Approx. 8 hrs.

Approx. 3.5 hrs.  Approx. 2.5 hrs.

 AC ADAPTOR

1

8

7

9

10
11

14
15
16

2

3

4

5

6

13

12

Содержание CE1000X








Отзывы: