APPLICANT: TOSHIBA CORPORATION
TRANSCEIVER TYPE: CJ6DCE44941A
PAGE 6 OF EXHIBIT Type “User Manual”
Volume Control
An Audio Level of the Alert Tone, Earpiese and the Key Tone can be adjusted by the Volume Control
Buttons.
Earpiece: Keep pressing
or
Button until the moderate Sound Level is got.
Alert Tone Level will be displayed on the Readout digitally during the level adjustment and the Sample
Tone will help you to know the Sound Level when not engaged in a Telephone Conversation.
3-2 PLACING TELEPHONE CALLS
To Place a Call
1. Enter a Telephone Number. Maximumits of the dialed number are displayed on the digital Readout.
2. If a dialing error is made, press
then enter the telephone number again. By pressing
momentarily (less than approx. 0.5 sec.), only last digit can be cleared. (Last Digit clear)
3. Press . The
indicator will light.
If a Call Fails to go Through
If you hear the Reorder signal, press
and try again.
Redial: If the Intercept signal is heard, press
and dial the Correct Number.
To Terminate a Call
Press
. The
indicator will go out.
To Receive Calls
When the Telephone rings, press
to answer.
The
indicator will light.
To Place a Call to a Number in Memory
Pressing
, then enter the Memory Address (01 through 99). If you want to see all number,
press
,
1. Press . The
indicator will light, and the Call will be placed.
3-3 END TO END SIGNALLING
This feature permits you to utilize some attractive ways of phone, such as Accessing Discounted Long
Distance Network, Signal Pager, or Banking by Phone etc.
For these purposes, the signaling should be in DTMF. ( Touch Tone TM )
3-4 CALL TIME DISPLAY
This Feature automatically counts the Time while the Conversation is being made through your Phone.
Both the Talk Time of the Last Call and Cumulative Talk Time, can be shown on the Readout.
The Memory for Timer can also be cleared if necessary, and you can notice the Talk Time roughly by
Tones on the Phone.
To Display the Talk Time of the Last Call
1. Press
, then
,
.
The Talk Time of the Last Call will be displayed on the Readout.
The display format is as follows.
31M 25S ... 31 min and 25 sec
To Display the cumulative Talk Time