Audiovox CDM-8920, Руководство пользователя

Страница: 27 / 80

Chapter 3 - Page 51
Page 50 - Chapter 3
CONT
CONT
ACTS
ACTS
ADAPTING DIGITS
If you regularly have trouble getting VoiceSignal to rec-
ognize numbers, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
Adaptation involves recording several sequences of
four digits each. The recording process takes about a
minute.
TO ADAPT DIGIT DIALING:
1. Start VOICESIGNAL .
2. Press SETTINGS , and then select DIGIT DIALING
➠
ADAPT DIGITS .
TO RESET DIGIT ADAPTATION:
1. Start VOICESIGNAL .
2. Press SETTINGS , and then select DIGIT DIALING
➠
RESET DIGITS .
CONT
CONT
ACTS
ACTS
USING NAME LOOKUP
Use the NAME LOOKUP command to retrieve contact
information for any name stored in your contact list by
saying the name. Name Lookup displays contact infor-
mation on the screen but does not dial any phone num-
bers for the contact.
TO USE NAME LOOKUP:
1. Start VOICESIGNAL .
2. Say “ NAME LOOKUP. ”
VoiceSignal prompts you to
“Say the name.”
3. Speak clearly and say the name of a person in your
contact list, first name followed by last name. For
example, say “
John Smith .”
If VoiceSignal recognizes the name, it displays the
contact information stored for that name. If it is not
sure which name you said, VoiceSignal displays a
choice list of up to three names and prompts you
with “Did you say?” followed by the first name on
the list.
4. Say “ YES ” to confirm the name or “ NO ” to hear the
next name, or use the keypad to select the correct
name from the list. (See the section, “Using Choice
Lists” for more information.) You can also say
“ CANCEL ” to exit the application, or “ REPEAT ” to say
the name again. VoiceSignal displays the contact
information stored for the name you selected.
●
Tips for adapting digit dialing:
• Adapt digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits,
or if there is an unexpected noise that spoils the recording,
re-record that sequence.
• Only adapt digits if you are regularly having problems with
digit dialing. Once you adapt, digit dialing will not work as
well for other people using your phone. (You can always
reset digit adaptation to its original state, as described
below.)
CDM-8920_TELUS0823 2004.8.23 5:19 PM Page 52