Audiovox BT-HP1, Руководство пользователя

Страница: 8 / 16

8
Pairing the stereo headset with a Bluetooth® audio device
You can connect the stereo headset to a Bluetooth® audio device transmitter to listen to music
wirelessly. Perform the following steps to pair the device to the stereo headset:
1.
Place the stereo headset and Bluetooth® audio device transmitter approximately three feet
apart without physical obstructions such as walls etc.
2. Enter the headset’s pairing mode (please refer to Entering pairing mode).
3. Activate your audio device transmitter Bluetooth® function and set your audio device
transmitter to search for Bluetooth® devices and send a pairing request.
4. When the stereo headset requests a password the Bluetooth® audio device transmitter will
respond with “0000”automatically.
5. Once the stereo headphones and the Bluetooth® audio device have paired, the blue LED
flashes twice every 4 seconds.
Note: The pairing password of the stereo headset is “0000”. The stereo headset can only pair with a
Bluetooth® transmitter whose pairing password is “0000”. If the pairing process still fails after several
attempts, refer to the Bluetooth® audio device transmitter documentation or further information.
Multi-Pairing the stereo headset
The stereo headset can connect with a maximum of two devices simultaneously. One device is a
Bluetooth® cell phone supporting HFP profile, while the other device is a Bluetooth® audio device
supporting A2DP profile. If you want to multi-pair, perform the following:
1.
First, pair the stereo headset with a Bluetooth® audio device transmitter (refer to Pairing the
stereo headset with a Bluetooth® audio device).
2. Turn off the Bluetooth® transmitter.
3. Pair and connect the headset with a Bluetooth® cell phone (refer to Pairing the stereo headset
with a Bluetooth® cell phone ”).
4. Turn on the Bluetooth® transmitter, it will connect to the headset automatically.
Note: After a successful multi-pairing, the paired devices will remember each other. Unless pairing
information is deleted because of a new pairing, they will no longer need to pair next time. If the
pairing information is deleted, please connect the cell phone with the stereo headset first and
then turn on the Bluetooth® transmitter at which time multi-pairing can be performed. For the cell
phones which support the HSP and A2DP at the same time, pairing with stereo headset may occur
simultaneously. In this situation, the Bluetooth® audio device transmitter may not connect to the
headset. 3.