5
5
5
5
5
TREBLE CONTROL
To adjust the treble level, first select the Treble
mode by pressing the Select button
3
3
3
3
3
until
the
TRB
indication appears on the display
panel. Within 5 seconds of choosing the
Treble mode, press the
or
buttons of the
Level Control
2
2
2
2
2
to adjust the treble response as
desired. The treble level will be shown on the
display panel from a minimum of
TRB--10
to a
maximum of
TRB 10
(
TRB 00
represents flat re-
sponse). The display will automatically return
to the normal indication 5 seconds after the
last adjustment or when another function is
activated. Adjusting the treble level will automati-
cally return the equalizer setting to the
FLAT
mode
from its previous setting.
6
6
6
6
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select
the Balance mode by pressing the Select button
3
until the
BAL
indication appears on the display
panel. Within 5 seconds of choosing the Balance
mode, press the
button of the Level Control
2
to adjust the stereo balance to the left channel
speakers or the
button of the control to adjust
it to the right channel speakers. The balance position
will be shown on the display panel from
BAL 10L
(full
left) to
BAL 10R
(full right). When the volume level
between the left and right speakers is equal,
BAL L=R
will be shown on the display panel. The
display will automatically return to the normal
indication 5 seconds after the last adjustment or
when another function is activated.
7
7
7
7
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first se-
lect the Fader mode by pressing the Select button
3
until the
FAD
indication appears on the display
panel. Within 5 seconds of choosing the Fader
mode, press the
or the
buttons of the Level
Control
2
to adjust the front-rear speaker levels
as desired. The fader position will be shown on
the display panel from
FAD 10R
(full rear) to
FAD 10F
(full front). When the volume level between
the front and rear speakers is equal,
FAD F=R
will
be shown on the display panel. The display will
automatically return to the normal indication 5 sec-
onds after the last adjustment or when an-
other function is activated.
8
8
8
8
8
LOUDNESS CONTOUR (LOUD)
When listening to music at low volume lev-
els, this feature will boost the bass and treble
ranges to compensate for the characteris-
tics of human hearing. Press and hold the
BAND/LOUD button for 2 seconds to acti-
vate this feature as indicated by
a beep tone
and
LOUD ON
appearing on the display
panel for about 5 seconds. (
LOUD
remains
on the display.) Pressing the button again
for 2 seconds will sound a beep tone and
LOUD OFF
will appear on the the display for
about 5 seconds.
9
9
9
9
9
AUDIO MUTE
This button is used to mute the volume from
the system. By pressing the button, the indi-
cation
MUTE
will appear flashing on the dis-
play panel and the volume will be muted.
Pressing the Mute button again or activating
any other function of the unit will return to the
volume level setting in use before the Mute
function was activated.
bl
bl
bl
bl
bl
AM/FM BAND SELECTOR
During radio play, each time the button is
pressed, the radio band changes. The indi-
cations
AM
,
F1
,
F2
, or
F3
will appear on the
display panel according to your selection.
bm
bm
bm
bm
bm
MANUAL UP/DOWN (
/
)AND
SEEK TUNING
Each time the Up Tuning button (
) is
pressed, the radio will tune higher, seeking
the next strong station and stop. Similarly,
each press of the Down Tuning button
(
) will tune lower and stop at the next
strong station. To manually seek a spe-
cific station, press the button in the appro-
priate direction until the desired frequency
is reached.
Press either button for longer than 2 sec-
onds;
MANUAL
will appear on the dis-
play. Now, when the Up or Down tuning
7
7
7
7
7
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS