on the display panel to show that a disc is
still loaded in the unit.
bl
bl
bl
bl
bl
BAND SELECTOR (BND/LOUD)
Each time this button is pressed, the radio
band is changed. The indication AM, F1, F2
or F3 will appear on the display panel
according to your selection.
bm
bm
bm
bm
bm
MANU/SKIP (
/
) BUTTONS
To select a radio station, momentarily pess
the Up MANU/SKIP (
) button to advance
the unit higher, or the Down MANU/SKIP
(
) button to tune lower within the selected
band. The radio will automatically tune to the
next strong station and stop on this
frequency. If the LOCAL mode is in effect,
the radio will seek the next local station and
stop at that frequency.
Pressing either button for longer than 2
seconds will cause MANUAL to appear on
the display, accompanied by a beep tone,
thereby entering the seek mode. Pressing a
button in this mode will cause the radio to
rapidly tune in the up or down direction and
stop when the button is released. The radio
will then remain at that frequency. Five
seconds after Manual tune is inactive, AUTO
will momentarily appear for 2 seconds,
thereby reverting to the normal tuning mode.
bn
bn
bn
bn
bn
LOCAL (LOC) BUTTON
This feature is used to select the strength of
the signals at which the radio will stop during
Automatic Seek Tuning. Pressing the button
will select the Local setting (LOCAL will
appear on the display panel for 5 seconds
and LOC will remain to the right of the
frequency display) and only strong (local)
stations will be received. Pressing the button
again will select the Distant setting (Dx will
appear on the display panel for 5 seconds)
and the radio will stop at a wider range of
signals, including weaker (more distant)
stations.
bo
bo
bo
bo
bo
FM MONO/STEREO BUTTON (MONO)
During FM radio operation, this button is
used to select monaural or stereo reception
of the broadcast signal. Under normal
reception conditions, the unit should be left
in the stereo mode as indicated by the ST
indication on the display panel when tuned
to an FM stereo signal. If the stereo signal
is too noisy for comfortable listening, press
the MONO button to switch to monaural
reception (the ST indication will disappear
from the display panel and MONO will
appear). To return to stereo reception mode,
press the button again so that the ST
indication appears on the display panel.
bp
bp
bp
bp
bp
PRE-SET SCAN (PS)
AUTO-STORE TUNING (AS)
Press this button momentarily to scan the
stations pre-set into the six memories of the
current band in use. The unit will stop at each
pre-set station for 5 seconds before
continuing to the next pre-set station (the
pre-set number on the display panel will flash
during Pre-Set Scan operation). Press the
button again momentarily to stop Pre-Set
Scan operation and remain on the selected
frequency.
Pressing and holding the button for longer
than 2 seconds will activate the Auto-Store
Tuning feature which will automatically scan
and enter up to 6 stations into the pre-set
memories of each FM band and the AM band.
If you have already set the pre-set memories
to your favorite stations, activating the Auto-
Store Tuning feature will erase those
stations and enter the new ones. This feature
is most useful when traveling in a new area
where you are not familiar with the local
stations.
8
8
8
8
8
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS
