4
2009 Audiovox Electronics Corporation. All rights reserved.
Using Your Remote Control
Arming the Security System
To arm the system, exit the vehicle, close all doors, then press the LOCK button on
the remote control. The system will flash the parking lights 1 time, indicating the
system is armed, has locked the doors (if equipped and connected) and activated
the starter disable feature. The status indicator (LED warning light) will blink
steadily, once per second.
NOTE: If one of the vehicle’s doors has been left open, the system will chirp 3
times upon arming the security system.
Disarming the Security System
To disarm the system press the UNLOCK button. The system will flash the parking
lights 2 times, and the doors will unlock (if equipped and connected).
Two Stage Door Unlock (Optional)
If this feature is enabled on your system, pressing the UNLOCK button one time on
the remote control will unlock only the driver’s door. Press UNLOCK again to
unlock the remaining doors.
Disabling / Enabling Confirmation Chirps
1.
Turn the ignition ON then OFF.
2.
Press and release the valet button 3 times. The system will respond
with 1 chirp for ON or 2 chirps for OFF.
IMPORTANT NOTE: The operation of the PROPLM Security System as described in
this manual is applicable to most vehicles. However, due to the engine type and
configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS
may not apply. Please see your installing dealer for more information.
* If vehicle is equipped with power door locks and they are connected to the
alarm system by your installer.
** May require additional connections, components, and/or charges. See your
installer for details.
