Audiovalve CORDA EARTUBE-1, Руководство пользователя

Страница: 4 / 11

Connections
At the rear side of the CORDA EARTUBE-1 two pairs of inputs allow you to connect two different
audio sources that have typical output voltages above 0.1 Volts (CD-player, cassette-player, tuner,
minidisc-player, ...). The source you want to listen to can be selected by the switch at the left front side
of the amp.
If your audio system already contains a central preamplifier or integrated amplifier you may prefer to
connect the
EARTUBE-1 to the tape-out of your central amplifier. The source now can be selected by
the Rec-switch of this central amp.
Your headphone should be connected to one of the headphone-sockets on the front side of the
EARTUBE-1 . You can also use the sockets to connect two headphones simultaneously.
The sockets are intended for 6.35 mm stereo jacks. If your headphone only has a 3.5 mm jack, then
use an adapter that can be obtained in most electronics or audio shops.