AUDIOTRAK MAYA44 USB User’s Guide
- 8 -
If you click
the '
Control
s
button
within the ASIO USB control panel
, you’ll see the below
mixer
window
.
You can
control
the
'Input
M
onitor
Level'
,
the '
Input Level
'
and
the
'Output level
' from the control
window
.
If you’re not clear with this chapter, please refer to the block diagram on
the
Page 24.
1. Monitor
Level Control
Section;
This
section
can be used to control
the
Input Monitor
Level
. You can monitor the
signals
through the
Input
channel
1,2 and Input
channel
3,4
individually
and/
or
simultaneously
. It
will not
a
ffect
the
input level
from the source
.
Even if
th
ese faders are
Muted, you can still record the signal
s
from the source
,
but you are not able
to monitor
the input source
through the analog output.
Caution
: Please never use
the
software
input
monitoring and
the
hardware
input
monitoring
simultaneously. You can’t get accurate monitoring and it may causes
the phasing problem to
the monitoring signal
.
2. Input Level Control
Section;
This
section controls
the real input level
through the input ports
. You can control all 4 inputs
using
the
one
set of the
stereo fader
s
.
