Oscillator tips
While both oscillators are essentially the same, they do not have the same direct shape modulation
source, lfo1 for osc1 and env3 for osc2.
So if you want to do the classic pwm sound, osc1 is better suited as you can directly modulate the
pulse width with lfo1, while if you want to do the classic hard sync sound, osc2 might be a wiser
choice as you’ll be able to control the pitch of the slave oscillator with env3.
This makes a better use of the internal architecture and can save modulation matrix slots.
About the noise filter (and all bipolar-value filters inside
the MM)
Throughout the synthesis architecture, several bipolar-value filters are available (noise filter, delay
filter, global filter for example).
These filters are all working in the same way:
•
When the value is negative, it acts as a 6dB lowpass filter
•
When the value is positive, it acts as a 6dB hipass filter
•
When set to 0, it has no effect
Audiothingies Micromonsta user manual
13
