Using the DoubleDrummer
Navigating pages
How to navigate throughout the DoubleDrummer architecture?
Parameters are mapped across different sections accessed by pressing a corresponding button on the
front panel.
When a section has several pages, you access them by successively pressing the same button several
times. When you are on the last page, it returns to the first one.
For example, pressing FX several times will make you travel the following pages: DLY > REV >
MFX > DLY > REV > MFX etc.
Some sections (the ones labeled in red under the white round buttons) are accessible by
simultaneously pressing Home [shift] + another button. For example [shift] + FX will take you to the
System page.
The encoders can be pushed to access menus that are shortcuts to specific parameters (level/pan/fx
send/fx type and mute).
Editing parameters
The LCD provides up to 6 parameters to edit depending on the menu you are currently editing
Simply use encoders 1-6 to change their corresponding parameter value.
TIP: the encoder acceleration value can be changed in System menu, page 2
TIP2: you can temporarily disable the acceleration and lower the sensitivity of an encoder by
pressing [shift] while turning the encoder.
Audiothingies DoubleDrummer user manual
8