H
ONO
C
OBRANET
4.4M
www.audioscience.com
14
30-Apr-15
15 CONFIGURATION
15.1 ASIControl Configuration
ASIControl is a Windows application that is installed along with the AudioScience drivers, download and install the
combo driver from the AudioScience website, taking care to correctly select the 32bit or 64-bit version based on
your operating system.
Run the driver .exe to install the driver components and be sure to select the second install
option: “Standard PCI
+ Network Driver’.
After driver installation, ASIControl can be run from either the desktop icon or from Start
All Programs
AudioScience
ASIControl.
If there is more than one NIC in the PC, upon startup, ASIControl will first prompt the user for which network
interface to use to communicate with CobraNet devices. Next, to invoke the CobraNet Object Tools COM object
to assign IP addresses to any CobraNet devices that do not currently have valid IP addresses, select
Options
Configure CobraNet IP address range and fill in the range. (See the CobraNet section for further
information.) Hono Mini CobraNet interface communication with the host is via UDP messaging using port 44600.
To preserve control changes made to the Hono Mini CobraNet interface, ASIControl must be shut down. This will
save control settings to the unit’s flash memory, allowing the settings to be restored after a power cycle.
15.1.1 ASIControl Layout
Figure 2. ASIControl layout
List of CobraNet
devices discovered on
the network. Highlighted
device is shown in the
topology pane.
Topology pane showing
the inputs and outputs
of the selected adapter.
The node 1 Microphone
1 has been selected by
left clicking with the
mouse. Its controls
show up in the node
pane.
Node pane shows the
controls on the selected
node; in this case 1
Microphone 1.
