Audiopipe DJAP-612PB, Руководство пользователя

Страница: 6 / 16

6
DJAP-61PB DJAP-615P
sound. The EQ function will be activated automatically as soon as you operate your DJAP .
15. MAIN MIX LEVEL Control
This control is used to adjust the overall volume of the main mix output. The adjustable range goes from - to +10dB.
16. OUTPUT LEVEL LED
The 4-segment LED meter is used to indicate the output level.
17. POWER LED
This LED lights up when the unit is powered on.
18. MAIN OUT Jack
This jack is used to output the main mix signal to an external unit.
19. MONITOR OUT Jack
This jack is used to connect the input signal of an external monitor amplifier or active monitor speaker.
20. FOOTSWITCH
You can connect an external footswitch to turn the onboard effect module on/off, via the 1/4" phone jack.
21. USB PLAY-PAUSE
You can connect an external footswitch to control MP3 player to play or pause.
22. FX SEND Jack
This jack is used to sent out the signal from AUX bus.
23. FX RETURN Jack
This jack is used to return the sound of an effect unit to the main mix. You can also use it as an extra auxiliary input.
3.2 DSP Section with 24-Bit Digital Effects
Your UPA features a special 100-preset digital effect, for further details please refer to the
following content.
24. DISPLAY
Displays the selected preset.
25. PROGRAM (PUSH)
Adjust this knob to select the right effect you wish to perform. There are total 100 options for
you: Vocal, Echo, Plate and versatile two-effect combination. When you are satisfied with the
chosen preset, please push this knob to store this preset.
26. DSP MUTE Button
This button is used to activate/deactivate the effect facility. Sometimes, you can also use the
FOOTSWITCH jack for convenient operation.
27. CLIP/MUTE LED
This LED lights up when the input signal is too strong. In case of the digital effect module being
muted, this LED also lights up.
28. AUX/DFX RET Control
This control is used to adjust the volume of FX RETURN and MAIN OUTPUT effect.
23
22
28
26
27
25
24