English
Page 11
SPRINTER - 120W BATTERY-OPERATED MODULAR SOUND SYSTEM
Notes :
- Caution: Please make sure to position the batteries properly, as described on Figure 2, as your device can be
damaged by an improper positioning.
- New batteries must be fully recharged before being used. The green indicator flashes during the charging
process and the
FULL
indicator remains lit when the battery is fully charged.
6 - 2 : Replacing the SPRINTER batteries
1
- Turn OFF your SPRINTER.
2
- Open the rear access hatch as
described on Figure 1.
3
- Remove the used batteries.
4
- Install the new batteries in their
compartment.
5
- Position the batteries as described on
Figure 2.
6
- Make sure the battery is in position and
close the hatch.
Red
Black
ON
OFF
WIRELESS MIC.
PRIORITY
LINE IN
1
2
1 - Indicators
: from
FULL
(batteries charged) to
LOW
(batteries
almost empty).
You must change the battery as quickly as possible when the
LOW
indicator is lit.
2 - DC Input
: Allows you to connect an external DC power supply
unit (24V 2.5A). Please respect the polarity (+ in the middle).
Note about batteries:
Please use the original battery. If need to replace the battery, use a
model with the same characteristics.
Please charge the batteries before using them for the first time. The
SPRINTER is designed to charge two batteries at a time.
In order to preserve the batteries, turn the device off when you are not using it.
The battery can be severely damaged it is totally emptied by an inactive system.
Moreover, the batteries must be regularly recharged to prevent it from drying.
The batteries are considered wearing parts and are not covered by the warranty.
6 - Power management
6 - 1 : Description of the power management system
1
2